1 2 3 4 5 6 78 9 11 12 13 14 1510GUID-805CB8E5-0BF2-409D-802C-57DC95659075 V1 ENFigure 35: Application Configuration tool: function block overview1. Connection(s)2. User-defined function block name3. Function block, selected (red)4. Function block name5. Function block, locked (red)6. Hardware, binary output channel7. Hardware, programmable LED8. Hardware, binary input channel9. Hardware, analog input channel10. User-defined signal name11. User-defined input variable12. Execution order13. Cycle time14. Instance number15. Signal description note5.1.2 Signals and signal managementFunction block has a set of input and output signals. The placement of function blocksignals is from left to right. Input signals are placed on the left and output signals onthe right.Function blocks can contain more signals than needed in that application part. Unusedsignals can be hidden to get a clear picture.Signals are located up and down on both sides of the middle position. When there isspace left, some signals may be moved up or down for better visibility and connectionrouting.1MRS240044-IB A Section 5Protection and control engineeringREF615R 63Engineering Manual
