• Configuration parameters• Setting parameters5.2.1 Configuration parameterConfiguration parameter specifies the operation mode of an application function or ofthe IED. These are basic configurations that are normally configured only once andthen not modified again. The IED configures itself during startup according to thegiven configuration parameter values.5.2.2 Setting parameterSetting parameter (short form: “setting”) is a parameter that can be changed in the IEDat runtime.5.2.3 Setting groupNearly all settings used by the IED for protection application functions are organizedinto a group of settings. Up to six setting groups can be configured with different values.The IED supports the selection of a setting group at runtime.5.2.4 IED parameter import and exportIED parameters can be imported and exported in XRIO file format. The parameter import/export functionality is available via the File menu when the Parameter Setting tool isopen.GUID-4A63FE0D-7846-4387-A5D3-BD7B4F519A76 V1 ENFigure 42: Parameter import/export1MRS240044-IB A Section 5Protection and control engineeringREF615R 71Engineering Manual
