Place Busbar Junctions intodisplay pageSelect Busbar Junctionsymbol and use Rotatecommand from toolbar to getthe busbar end to the marginGUID-A58439A5-575C-4EED-A5A9-77FDECAA9D21 V1 ENFigure 54: Graphical Display Editor: drawing a busbar and placing busbarjunctions3. Add a link between one Busbar Junction point and the corresponding symbol orjunction point.6.1.1.10 Adding symbols into a display page1. Prepare the body of the single-line diagram by locating symbols to the wantedpositions on the display.2. Drag the apparatus or transformer symbols into a raster box.3. Drag the connection symbols into a raster box.4. Place the junction points.Do not connect two symbols directly to each other. Instead, add a junctionbetween them.5. Use the X and Y coordinates in the Object Properties window to adjust theplacement of symbols in the single-line diagram.1MRS240044-IB A Section 6LHMI engineeringREF615R 91Engineering Manual
