GUID-7A92C4F7-7F86-404E-81ED-FBF0692753F7 V1 ENFigure 6: Activating the connectivity packagePCM600 recognizes the installed connectivity package(s) during startup and thecorresponding IED types are available in PCM600 when starting a new project.4.3 Setting up IP addressesThe IP address and the corresponding subnet mask can be set via LHMI for the rearEthernet interface in the IED. Each Ethernet interface has a default factory IP addresswhen the complete IED is delivered. The default factory IP address is not given whenan additional Ethernet interface is installed or when an interface is replaced.The IED front port IP address is fixed to 192.168.0.254 and it cannot bemodified.1. Set the IP address for the IED rear port and the corresponding subnet mask viathe LHMI path: Configuration/Communication/Ethernet/Rear port.Default IP address for the IED rear port Corresponding subnet mask1MRS240044-IB A Section 4Setting up a projectREF615R 29Engineering Manual
