5.4.2 Load Profile tool user interfaceGUID-4B275369-045F-4407-89A2-44071839699D V1 ENFigure 47: Load Profile tool interfaceTable 4:Available actions on the user interfaceAction DescriptionLocal Path Default local path (C:\PCMDataBases\LPR) is the location from which the recordsare shown on the Load Profile tool. It is also the default path for saving records.Local Path field also allows the user to change the target location where the recordsare saved. The grid of the Load Profile tool shows only the records in the default localpath including unsaved records in the temp path (C:\Temp\Load\Profile Tool) ifthere are any. Therefore changing the default local path allows the user to saverecords at the specified location on the local machine but the user is not be able tosee those records in the grid of the Load Profile tool.Load Clicking the Load button downloads all available records from C:\LDP\COMTRADEdirectory in the IED to a temporary folder C:\Temp\LoadProfileTool on the localmachine. In this temporary folder, the target file name is constant, and loading againoverwrites the file. An unsaved record is deleted when the tool is closed.Save Clicking the Save button moves the records to the default or specified local path, Loadtransfers the records to a temporary folder. Each load profile record comprises twofiles with file extensions .dat and .cfg.Clicking Save adds a time stamp to the file names and moves the two files pertainingto the record to the default or specified folder. Saving another record creates a newrecord in addition to the old ones.Clear Clicking the Clear button clears record from either the Load Profile tool or IED or both.Before deleting the records, a confirmation dialog box is shown.Table continues on next pageSection 5 1MRS240044-IB AProtection and control engineering78 REF615REngineering Manual
