Setting up an IED in the offline mode is similar as in the online mode; however,with the offline mode it is not necessary to type the correct IP address in theCommunication port and IP address dialog box.4. On the order code selection page, select the correct order codes.5. Click Generate to generate the functions for the selected order code.A Function generation complete dialog box is shown. Click Close.6. Click Next on the Setup Complete Page that shows the summary of the IEDtype, version, IP address and the selected order number.7. Click Finish to confirm the configuration and conduct the insertion.4.6.3 Inserting an IED from the template directoryIED templates can be used for replicating IEDs with same order code in PCM600projects. Template includes IED application configuration, graphical displayconfiguration (single-line diagram), communication protocol mappings andparameters. An IED in the plant structure can be exported as a template (.pcmt file).The template library can be built from all the exported IED templates.It is also possible to insert an IED from the template library to create a new IED in theplant structure. After a template IED has been imported, the IP address, the Caption inIED Object Properties and the Technical Key that corresponds to the physical IEDhave to be changed.A template IED can be inserted only when the bay is selected in theplant structure.1. In the Plant structure view, select the bay, right-click, point to New and selectCreate from template.The Create New Object from Template dialog box opens.1MRS240044-IB A Section 4Setting up a projectREF615R 41Engineering Manual
