Section 1 Introduction1.1 This manualThe engineering manual contains instructions on how to engineer the IEDs using thedifferent tools in PCM600. The manual provides instructions on how to set up aPCM600 project and insert IEDs to the project structure. The manual also recommendsa sequence for engineering of protection and control functions, LHMI functions as wellas communication engineering for IEC 61850 and other supported protocols.1.2 Intended audienceThis manual addresses system and project engineers involved in the engineeringprocess of a project, and installation and commissioning personnel, who use technicaldata during engineering, installation and commissioning, and in normal service.The system engineer must have a thorough knowledge of the load-sheddingfunctionality, protection and control equipment and the configured functional logic inthe IEDs. The installation and commissioning personnel must have a basic knowledgeof handling electronic equipment.1.3 Product documentation1.3.1 Product documentation setThe application manual contains application descriptions and setting guidelines sortedper function. The manual can be used to find out when and for what purpose a typicalprotection function can be used. The manual can also be used when calculating settings.The communication protocol manual describes a communication protocol supported bythe IED. The manual concentrates on vendor-specific implementations.The engineering guide provides information for IEC 61850 engineering of theprotection IEDs with PCM600 and IET600. This guide concentrates especially on theconfiguration of GOOSE communication with these tools. The guide can be used as atechnical reference during the engineering phase, installation and commissioning1MRS240044-IB A Section 1IntroductionREF615R 5Engineering Manual
