Chapter 3. Configuration3-36 MX2800 STS-1 User Manual 61200659L1-1MiscellaneousEquipment IdentificationThese fields allow you to store information that identifies the unit.Unit IDProvides a user-configurable text string for the name of theMX2800 STS-1. This name can help you distinguish between dif-ferent installations. You can enter up to 32 alpha-numeric charac-ters in this field, including spaces and special characters (such as anunderbar). This information is locally stored and displayed in theupper right-hand corner of the MX2800 STS-1 terminal screens.STS-1 J1 Path TraceTx – 62 byte string to be transmitted in the J1 Path Trace (CR/LFare automatically appended to the string).Rx – 62 byte string received in the J1 Path Trace.Syslog SetupSelections include T RANSMISSION, H OST IP ADDRESS, S EVERITYL EVEL, and H OST F ACILITY.TransmissionE NABLE or D ISABLE the transmission of log events to the externalSyslog server. You must first define the host IP address.Host IP AddressSpecifies the IP address of the external server that is running theSyslog host daemon.Severity LevelSpecifies the lowest level of severity that causes messages to belogged to the Syslog server. The levels are listed in Table 3-1 onpage 3-37, in order of decreasing severity. Any message at or abovea selected severity level will be logged if a transmission is enabled.
