Chapter 3. Configuration61200659L1-1 MX2800 STS-1 User Manual 3-41Update via TFTP ServerSelect U PDATE VIA TFTP SERVER from the U TILITIES menu. A newmenu displays, allowing you to enter the IP address and file nameof the file you want to download to the unit. Once this informationis entered, select START /STOP T RANSFER.Config TransferSelect C ONFIG T RANSFER from the U TILITIES menu to transfer files toand from a TFTP server. The C ONFIG TRANSFER option also lets yousave the MX2800 STS-1 configuration as a backup file, so you canuse the same configuration with multiple MX2800 STS-1 units.Only one configuration transfer session (upload or download) canbe active at a time.Saving to a TFTP ServerTo save current configuration information to a TFTP server, followthe steps listed below.1. Set the SERVER IP ADDRESS field to the IP address of themachine running the TFTP server program.If you are using the ADTRAN TFTP server, the IP addressdisplays in the SERVER IP A DDRESS field. For other TFTPservers, please refer to the appropriate documentation.2. Change the TFTP Server Filename to a unique filename. ThisBefore using C ONFIG T RANSFER, the MX2800 STS-1 should have a validIP address, subnet mask, and default gateway (if required), and shouldbe connected to an Ethernet network.
