Command Reference Guide Enable Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 107debug ip dhcp-clientUse the debug ip dhcp-client command to activate debug messages associated with Dynamic HostConfiguration Protocol (DHCP) client operation in the AOS. Debug messages are displayed (real time) tothe terminal (or Telnet) screen. Use the no form of this command to disable the debug messages.Syntax DescriptionNo subcommands.Default ValuesBy default, all debug messages in the AOS are disabled.Applicable PlatformsThis command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 andTotal Access 900 Series units.Command HistoryRelease 2.1 Command was introduced.Functional NotesThe debug ip dhcp-client command activates debug messages to provide information on DHCP clientactivity in the AOS. The AOS DHCP client capability allows interfaces to dynamically obtain an IP addressfrom a network DHCP server.Usage ExamplesThe following example activates debug messages associated with DHCP client activity:>enable#debug ip dhcp-client
