Command Reference Guide Enable Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 255show running-configUse the show running-config command to display a text print of all the non-default parameters containedin the current running configuration file. Specific portions of the running-config may be displayed, basedon the command entered.Variations of this command include the following:show running-configshow running-config access-listsshow running-config access-lists verboseshow running-config checksumshow running-config interface show running-config interface verboseshow running-config ip-cryptoshow running-config ip-crypto verboseshow running-config policy-classshow running-config policy-class verboseshow running-config qos-mapshow running-config qos-map verboseshow running-config router pim-sparseshow running-config router pim-sparse verboseshow running-config verboseSyntax Descriptionaccess-lists Displays the current running configuration for all configured IP access lists.checksum Optional. Displays the encrypted Message Digest 5 (MD5) version of therunning configuration.interface <interface type> Displays the current running configuration for a particular interface. Typeshow running-config interface ? for a list of valid interfaces.<interface id> Specifies any valid slot/port interface (e.g., 0/1).ip crypto Displays the current running configuration for all IPSec VPN settings.policy-class Displays the current running configuration for all configured policy classes.qos-map Displays the current running configuration for all configured QoS maps.router pim-sparse Optional: Displays the current global PIM-SM configuration.verbose Optional. Displays the entire running configuration to the terminal screen(versus only the non-default values).Default ValuesNo default value necessary for this command.
