Command Reference Guide Enable Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 89debug aaaUse the debug aaa command to activate debug messages associated with authentication from the AAAsubsystem. Debug messages are displayed (real time) on the terminal (or Telnet) screen. Use the no formof this command to disable the debug messages.Syntax DescriptionNo subcommands.Default ValuesBy default, all debug messages in the AOS are disabled.Applicable PlatformsThis command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 andTotal Access 900 Series units.Command HistoryRelease 5.1 Command was introduced.Functional NotesThe debug aaa events include connection notices, login attempts, and session tracking.Usage ExamplesThe following is sample output for this command:>enable#debug aaaAAA: New Session on portal 'TELNET 0 (172.22.12.60:4867)'.AAA: No list mapped to 'TELNET 0'. Using 'default'.AAA: Attempting authentication (username/password).AAA: RADIUS authentication failed.AAA: Authentication failed.AAA: Closing Session on portal 'TELNET 0 (172.22.12.60:4867)'.
