Command Reference Guide Global Configuration Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 340exception report [filename ]Use the exception report command to specify the output filename for the exception report.Syntax Descriptionfilename Optional. Specifies a filename for the exception report other than the defaultfilename.Default ValuesBy default, the exception report filename is exception report-yyyyMMddHHmmss. (TheyyyyMMddHHmmss will be automatically replaced with the actual year, month, day, hour, minutes, andseconds.)Applicable PlatformsThis command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 andTotal Access 900 Series units.Command HistoryRelease 10.1 Command was introduced.Usage ExampleThe following example specifies the output filename for an exception report:(config)#exception report file-name example(config)#exit#exception report generateException report generated.#show flash1744 startup-config45676 example-20050708080537#config t(config)#no exception report file-name(config)#exitAppropriate commands must be issued to preserve configuration.#exception report generateException report generated.#show flash1744 startup-config45676 example-2005070808053745900 exception-report-20050708080552
