ADTRAN 5000 Series Command Reference Manual

Contents

ADTRAN 5000 Series Command Reference Manual Manual pdf 133 page image

Command Reference Guide Enable Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 133debug radiusUse the debug radius command to enable debug messages from the RADIUS subsystem. Debug messagesare displayed (real time) to the terminal (or Telnet) screen. Use the no form of this command to disable thedebug messages.Syntax DescriptionNo subcommands.Default ValuesBy default, all debug messages in the AOS are disabled.Applicable PlatformsThis command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 andTotal Access 900 Series units.Command HistoryRelease 5.1 Command was introduced.Functional NotesThe debug radius messages show the communication process with the remote RADIUS servers.Usage ExamplesThe following is an example output for the debug radius command:>enable#debug radiusRADIUS AUTHENTICATION: Sending packet to 172.22.48.1 (1645).RADIUS AUTHENTICATION: Received response from 172.22.48.1.