Command Reference Guide Ethernet Interface Configuration Command Set61200990L1-35E Copyright © 2005 ADTRAN 527E THERNET I NTERFACE C ONFIGURATION COMMAND S ETThere are four types of Ethernet interfaces associated with the AOS:• Basic Ethernet interfaces (e.g., eth 0/1)• Gigabit Ethernet interfaces (e.g., giga-eth 0/3)• Ethernet sub-interfaces associated with a VLAN (e.g., eth 0/1.1)• Ethernet interface range (e.g., eth 0/1, 0/8)To activate the basic Ethernet Interface Configuration mode, enter the interface ethernet command at theGlobal Configuration mode prompt. For example:>enable#configure terminal(config)#interface ethernet 0/1(config-eth 0/1)#To activate the Gigabit Ethernet Interface Configuration mode, enter the interface gigabit-ethernetcommand at the Global Configuration mode prompt. For example:>enable#configure terminal(config)#interface gigabit-ethernet 0/3(config-giga-eth 0/3)#To activate the Ethernet Sub-Interface Configuration mode, enter the interface ethernet command at theGlobal Configuration mode prompt. For example:>enable#configure terminal(config)#interface ethernet 0/1.1(config-eth 0/1.1)#To activate the Ethernet Configuration mode for a range of Ethernet interfaces, enter the interface rangecommand at the Global Configuration mode prompt. For example:>enable#configure terminal(config)#interface range ethernet 0/1, 0/8(config-eth 0/1, 0/8)#
