Command Reference Guide Enable Mode Command Set61200990L1-35E Copyright © 2005 ADTRAN 169show demandUse the show demand command to display information regarding demand routing parameters andstatistics.Variations of this command include the following:show demandshow demand interfaceshow demand interface show demand resource poolshow demand resource pool show demand sessionsSyntax Descriptioninterface Displays the information for all demand routing interfaces.interface Displays information for a specific demand routing interface. Validrange: 1 to 1024. Type show demand interface ? for a list of validinterfaces.resource pool Displays all resource pool information.resource pool Displays resource pool information for a specific resource poolname.sessions Displays active demand sessions.Default ValuesNo default value necessary for this command.Applicable PlatformsThis command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.Command HistoryRelease 11.1 Command was introduced.Usage ExamplesThe following is example output from the show demand interface command:>enable#show demand int 1Demand 1 is UP (connected)Configuration:
