7-2DuraLAN Fast Ethernet NICs User’s GuideSpecial Notes for UnixWareWhen you are installing Adaptec DuraLAN NICs, it is a good ideato document where each port physically resides in the server—especially when two or more identical NICs exist.Installing the Standalone Driver onUnixWare 7.xTo install the Standalone driver for UnixWare 7.x (which includesUnixWare 7.1.x), follow these steps:1 Insert the UnixWare 7.x driver CD into the CD-ROM drive.2 Log on to the UnixWare 7.x CDE as the root user.3 Open the dtterm console.4 Mount the CD-ROM by typing the following command afterthe prompt (#):mount -F cdfs –r /dev/cdrom/cdrom1 /mntThen press Enter.5 Again at the prompt, typepkgadd -d /mnt/uw7x/duralan.pkgand press Enter to add the package (driver).6 Run netcfg to open the Network Configuration Managerwindow.7 Go to the Hardware menu.8 Select Add new LAN adapter.9 Select Ethernet-Adaptec DuraLAN NIC Driver, then selectContinue.10 Select Advanced Options, and select the appropriate speed.(The default speed is AutoNegotiation.)11 Select OK. The Add Protocol window will appear.12 At the Add Protocol options menu, select the desired protocol(IPX/SPX or TCP/IP), and click Add.13 Enter the network configuration, and click OK.14 Click OK once more to finish the configuration process.
