D-1DThe Diagnostics UtilityYour Adaptec DuraLAN NIC is supplied with a DOS Diagnosticsutility that is found on the LAN and Duralink64 Failover DriversNetWare CD. Use the Diagnostics utility to check the functionalityof your DuraLAN NICs.Running the DiagnosticsFrom the Hard Disk DriveTo run the Diagnostics utility from your hard disk drive, followthese steps:1 Make sure himem.sys and emm386.exe are currently inconfig.sys and that files=30 is present.If they are not, add these lines to the top of the config.sys file:device=c:\dos\himem.sysdevice=c:\dos\emm386.exe /noemsfiles=30Type the path to the DOS programs if it is not found in c:\dos.2 Create a directory for the diagnostics on your hard disk drive.3 Copy all files in this directory to the new diagnostics directory ofthe hard disk drive.4 At the DOS prompt, type go_diags, and press Enter.Note: The easiest way of testing a DuraLAN NIC is runningthe Selftest.
