C-2DuraLAN Fast Ethernet NICs User’s GuideSNMP SupportThe message !SNMP service is not installed will appear during theinstallation and configuration of Windows NT if SNMP service isnot installed. If SNMP functionality is not desired, ignore thismessage. If SNMP is desired, install SNMP Service using theWindows NT CD, then reinstall SP3.The driver installation enables an SNMP agent to providemanagement information to the SNMP management station. Theagent supports both the DuraLAN and older EMPCI NICs.However, if you install your EMPCI drivers after the DuraLANinstallation, management information is restricted to the EMPCIconfiguration.The .mib file used for your SNMP management console is locatedin the following directory: a:\snmpmibs\duralink.mib. Aftercompiling this file on an SNMP management station, you will thenreceive traps or events relative to the DuraLAN network adapter.Note: Duralink64 software does not support SNMP forWindows 2000 or UnixWare.
