4-5Duralink64 Configurations for Windows2 In the New Adaptec NIC Ports Available box, select theappropriate port.3 In the Connection Types field, select Autodetect DefaultConnection (The connection type will automatically beapplied), or select the connection type for your network. Fordescriptions, see Connection Types on page A-2.4 Repeat Steps 2 and 3 for each existing port.5 Remove the CD and click OK.6 When you are done, click Close in the Network window. SeeAssigning the TCP/IP Address on page 4-16.7 At the Network Settings Change information box, click Yes torestart your system.Configuring the Ports in Windows 98/MeTo configure ports in Windows 98/Me, follow these steps:1 From the Start menu, point to Settings, and click ControlPanel.2 In the Control Panel, double-click Network.3 In the Network window, click the appropriate DuraLAN NIC,and click Properties.
