3-11Duralink64 Driver Installation for Windows4 Double-click Network adapters.5 Select the Adaptec DuraLAN NIC that you wish to remove.6 Right-click and select Uninstall.7 Click OK; the driver will be uninstalled.Windows NT 4.0To remove the previously installed DuraLAN driver from aWindows NT 4.0 platform, follow these steps:1 Double-click My Computer.2 Double-click Control Panel.3 Double-click Network.4 In the Network window, click the Adapters tab.5 In the Network Adapters list, click the Adaptec DuraLAN NICyou want to remove, and click Remove.6 When asked if you wish to continue, click Yes.7 Repeat Step 5 until all Adaptec DuraLAN drivers are removed.8 When you are done, click Close.9 Click Close to close the Network window.10 Click Yes to restart your computer.Note: When you restart Windows NT, a message mayindicate that at least one service failed to start. Thismessage will not appear after you add the new driver.Click OK.Windows 98/MeTo remove the previously installed DuraLAN driver from theWindows 98/Me platform, follow these steps:1 From the Start menu, point to Settings, and click ControlPanel.2 In the Control Panel, double-click System.
