IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 105Uploading APOSUse ftp from DOS window of PC to upload APOS for the Ipnext190. Press ‘Start’ of the windowand enter ‘cmd’ in Run widow, then DOS window opens up.Table 3-82 APOS Upgrade (DOS Screen)D:\ >dir2008-08-14 15:21p .2006-08-14 15:21p ..2008-08-14 15:21p 5,229,160 ipnext190_g2_v8_47_024.binD:\>D:\> ftp 172.17.113.50 => Access to the serverConnected to 172.17.113.50.220 IP-PBX FTP server (Version 8.47.010) ready.User (172.17.113.50:(none)): root331 Password required for root.Password:230 User root logged in.ftp> binary => Change to binary mode200 Type set to I.ftp> hash => Display Hash markHash mark printing On ftp: (2048 bytes/hash mark) .ftp> put ipnext190_g2_v8_47_024.bin => ipnext190_g2_v8_47_024.bin => Upload the file200 PORT command successful.150 Opening BINARY mode data connection for 'ipnext190_g2_v8_47_010.bin'.################################################################################------------ -----------#########################################################################226 Transfer complete.ftp: 5229160 bytes sent in 1.92Seconds 2720.69Kbytes/sec.ftp> quit221 Goodbye. => Do not reboot the IPNext PBX until the message is displayed as ‘The system software isupdated’ at the console connected to the IPNext PBX, even after the message of ‘Goodbye’ is displayed.D:\>
