IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 113Step7. Configure ldapclientWhen initialization of Call Manager and rebooting are completed by System Maintenance Tool, you are readyto configure Ldapclient for Call-Manager Service.Table 4-9 Configuring Ldap ClientStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter the APOS command mode2 IP-PBX(config)# ldapclient Enter ldapclient configuration mode3 IP-PBX(config-ldapclient)# name IPNext190_test Configure device name to be registeredto ldap4 IP-PBX(config-ldapclient)# host 127.0.0.1 389 Specify the IP and port of ldap serverDefault IP (127.0.0.1) Default Port(389)5 IP-PBX(config-ldapclient)# ldap enable Enable ldap Client serviceStep8. Verify the Status of Call Manager ServiceAfter the settings of ladapclient is completed, use show call-manager domain cluster command to verify thestatus of Call Manager service (If CallManger Status is In Service and Monitoring LDAP Connection Status isEnable, the service is in normal operational status).Table 4-10 Verifying the Status Call-Manager ServiceStep Command Description1 IP-PBX# show call-manager domain clusterDevice pool---------------------------DevicePool 1Name = defaultRegion = 1CallManagerGroup Information- N/ACallManager Status SummaryIf CallManager Service is In Serviceand ldap connection is UP, the serviceis in the normal operational status
