IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 50Current configuration:version 8.47.024!hostname IP-PBXenable password abccommandTable 3-11 Disabling PasswordStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#2 IP-PBX(config)# no enable passwordhostnameYou can change the prompt name in CLI that appears when you connect to the devices through aconsole or Telnet. If you manage multiple devices through Telnet connection, the host name is veryimportant. It would be convenient to use the host name as the device name or location.The following example shows to set the host name to ‘IPNext190’.Table 3-12 Creating a HostnameStep Command Description1 ## config tEnter APOS configuration command mode2 (config)# hostname IPNext190 Set the host name to ‘IPNext190’3 IPNext190(config)# exitIPNext190#The hostname is set to IPNext190Table 3-13 Initializing HostnameStep Command Description1 IPNext190#IPNext190# configure terminalIPNext190(config)#2 IPNext190(config)# no hostname
