IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 43Administrator Mode CommandsOnly the administrator, who logs into the gateway, can use the commands in the administrator mode. To usethis command, you must log in to the gateway by the root account. An entrance to the configuration of thegateway is possible only when you log in as administrator mode.At the administrator, all the commands in the user mode can be used.The prompt for the administrator mode can be displayed as ‘IP-PBX#’.Table 3-2 Administrator Mode CommandsCommand Descriptionclear Initializes the initial counter and statisticsclock Sets the present year, date and timeconfigure Enters to the configuration modecopy Copies running config to startup configdebug Debugs the overall systemdisable Enters to the user modedisconnect Closes VTY connectiondnsquery Used for DNS Query testdnsrv Used for DNS SRV Record Testend Enters to the administrator modeerase Deletes config fileexit Moves to a notch previous mode from the presentfsh Enter File Shellftp Displays APOS help screenhelp Deletes the present configurationno Transmits updated information to Name Servernsupdate Receives the clock information from ntp serverntpdate Checks the network connection (IPv4)ping Checks the network connection (IPv6)ping6 Equals to exitquit Reboots the systemreboot Checks the present status of the configurationshow Connects remotelytelnet Sets to display the terminal and debussing information
