IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 85Table 3-66 Changing LDAP PortStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter APOS command entry mode2 IP-PBX(config)# ldap Enter ldap configuration mode3 IP-PBX(config-ldap)# no slapdWaiting for cache to release all entries.IP-PBX(config-ldap)# LDAP daemon is nowinactive.Disabling ldap service4 IP-PBX(config-ldap)# slapd 9389LDAP LDBM backend cache entry size is 5000LDAP daemon is now activeSet ldap port to 9389(Range: 1-65535)5 IP-PBX(config-ldap)# exit Exit from ldap configuration mode6 IP-PBX(config)# ldapclient Enter ldapclient configuration mode7 IP-PBX(config-ldapclient)# host 127.0.0.1 9389 Change ldap server port to 93898 IP-PBX(config-ldapclient)# end Exit from ldapclient configurationmode9 IP-PBX# writeProceed with write? [confirm]Building configuration...[OK] Configuration saved toflash:/flash/apos.cfgSave the settings10 IP-PBX# reboot Reboot the systemTable 3-67 Verifying LDAP and Notification Server Configuration SettingsStep Command Description1 IP-PBX# show runBuilding configuration…Current configuration:version 8.47.024hostname IP-PBX!ldapdata-dir /hd/ldapsuffix “dc=addpac,dc=com”Use show run command toverify ldap and notificationserver configuration settings
