IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 52Line vty/consoleThis command configures the settings for the remote user access and console. If no entry is made for a certaintime period, this command configures the settings for the time to delete the corresponding terminal. If the settingis not entered, the default value is set to10 minutes. If you do not want to delete the terminal, set the time to 0.Table 3-16 Line vty/console Configuration SettingsStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter APOS command mode2 IP-PBX(config)# line vty Enter vty configuration mode3 IP-PBX(config-line)# exec-timeout < minutes> <seconds>Set the time for ending the session ofthe terminal automatically if no entry ismade for a certain time period.4 IP-PBX(config-line)# exec-timeout 0 If no entry is made, the session of theterminal is not ended(Default: exec-timeout 10)5 IP-PBX(config-line)# session-limit <1-8> Set the maximum number of vtysessions6 IP-PBX(config-line)# session-limit 5 Set the limit on vty session to 57 IP-PBX(config)# exit Exit from vty configuration mode8 IP-PBX(config)# line console Enter console configuration mode9 IP-PBX(config-line)# exec-timeout 0 If no entry is made, the consoleterminal session is not ended(Default: exec-timeout 10)Table 3-17 Verifying Line vty/console SettingsStep Command Description1 IP-PBX# show runBuilding configuration...Current configuration:version 8.47.024hostname IP-PBX!line consoleUse show run command to verify LineVTY/Console
