IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 51IP-PBX(config)#clockUse ‘show clock’ command to find out the system time and the present running time. Thiscommand displays the time logging and debugging on the present time basis. The clock shouldbe set to the present time.The following is an example for setting up clock to the present.Table 3-14 Clock Configuration SettingsStep Command Description1 # config t Enter APOS configuration command mode2 (config)# clock time 2008 08 07 15 50 00 Set the clock to the present time of 2005 06 07 15 50 00Table 3-15 Verifying clock SettingsStep Command Description1 IP-PBX# show clockSystem was started at Fri Dec 1 01:54:57 2008Current time is Fri Dec 1 07:35:11 2008Running time is 0 days 05:40:14IP-PBX#Use show clock command to verify thepresent time setting
