IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 92LDAP ClientLDAP Client must be configured for Call Manager service. After LDAP Client is configured,Device is automatically registered to Call Manager LDAP.Table 3-75 LDAP Client Configuration SettingsStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter APOS command entry mode2 IP-PBX(config)# ldapclient Enter ldapclient configuration mode3 IP-PBX(config-ldapclient)#name IPNext190_test Create a device name for registeringldap.4 IP-PBX(config-ldapclient)#host 127.0.0.1 389 Configure ladap server IP and portDefault IP 127.0.0.1 Default Port 3895 IP-PBX(config-ldapclient)# ldap enable Enable ldapclient service(Default: Disable)6 IP-PBX(config-ldapclient)# autoregstart(optional) Use this command toreregistering the device automaticallyif the device is deletedTable 3-76 Verifying LDAP Client Configuration SettingsStep Command Description1 IP-PBX# show runBuilding configuration...Current configuration:version 8.47.024hostname IP-PBX!ldapclientname IPNext190_testhost 127.0.0.1 389ldap enable!!Use show run command to verify theconfiguration settings of ldap client.2 IP-PBX# show call-manager domain cluster Use show call-manager domain cluster
