IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 66loggingUse logging command to manage devices and logs the operational status of the devices and determines the levelof this information, provides the information to a specific host. All the settings of logging can be done in GlobalConfiguration Mode.Table 3-40 Configuring LoggingStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter APOS command entry mode2 IP-PBX(config)# logging host server ip172.17.10.20 515Specify the IP address and port of theremote host to which logginginformation is to be sent3 IP-PBX(config)# logging on Enable logging(Default: disable)4 IP-PBX(config)# logging command Transmit command entry through vty5 IP-PBX(config)# logging event ? Set the condition for logging event0-emergency1-alert2-critical3-error4-warning5-notice6-informational7-debugSystem unusableImmediate action neededCritical conditionError conditionWarning conditionNormal, but significant,conditionInformational messagesonlydebug-level messagesUsing logging event 7-debug isrecommended in general
