IPNext 190 System Installation GuideAddPac Technology Proprietary & Documentation 132 - 80Call-Manager Service Configurationhttp serverhttp server is enabled at default. If it is disabled, it should be enabled for configuring the settings of the IPNextPBX, this command is to check the status of Call Manager and use Auto Upgrade Server.Table 3-58 Configuring httpStep Command Description1 IP-PBX#IP-PBX# configure terminalIP-PBX(config)#Enter APOS command entry mode2 IP-PBX(config)# http server Enable HTTP server. (default)3 IP-PBX(config)# no http authentication (Optional) Access to the server withouthttp authentication. http authenticationis recommended.(Default: enable)4 IP-PBX(config)# http document-root /hd Configure the default directory foraccessing Web-based SMM (the defaultsetting for the version lower thanv8.47.024 is /hd)*When you upgrade to higher versionthan v8.47.024, change the setting ofhttp document–root to /hd (the defaultsetting for the version lower thanv8.47.024 is /hd/smartclient)Table 3-59 Verifying http Configuration SettingsStep Command Description1 IP-PBX# show runBuilding configuration...Current configuration:version 8.47.024hostname IP-PBX!interface FastEthernet0/0Use show run command to verify httpconfiguration settings
