Axis 01107-004 User Manual

AXIS M5065 PTZ Network CameraVideo and AudioAbout overlaysOverlays are superimposed over the video stream. They are used to provide extra information during recordings, such as a timestamp,or during product installation and configuration.About overlay textAn overlay text can include the current date and time, or a text string. When using a text string, so-called modifiers can be used todisplay, for example, the current bit rate or the current frame rate.You can choose between the following text overlay sizes:Size Text height Background heightSmall 10 pixels 20 pixelsMedium 16 pixels 28 pixelsLarge 21 pixels 36 pixelsIt is also possible to display text when an action rule is triggered, see How to include overlay text in an action rule on page 22.How to include overlay text1. Go to Video & Audio > Video Stream and select the Image tab.2. To include date and time, select Include date and Include time.3. To include a text string, select Include text and enter the text in the field. Modifiers can be used, see File Naming &Date/Time Formats in the online help .4. Select size, color, and placement of the text string.5. Click Save.To modify the date and time format, go to System Options > Date & Time. See Date & Time on page 48.How to include overlay text in an action rule1. Go to Video & Audio > Video Stream and select the Image tab.2. Under Overlay Settings, select Include text.3. Enter the modifier #D. When the rule is triggered, #D is replaced by the text specified in the action rule.Additional text in this field will be displayed also when the action rule is not active.4. Go to Events > Action Rules and create your action rule.5. From the Actions list, select Overlay Text.6. Enter the text to display in the Text field.7. Specify the Duration. The text can be displayed while the rule is active or for a fixed number of seconds.How to display the pan or tilt position as a text overlayIt may be useful to retrieve, for instance from a recorded video, the pan or tilt position (in degrees) in which an event has takenplace. This can be obtained by including the position in the image as a text overlay, using a modifier. To display the pan position as atext overlay:1. Go to Setup > Video > Video Stream.22