Axis 01107-004 User Manual
                                                                  |
AXIS M5065 PTZ Network CameraSpecificationsSpecificationsTo find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation.LED IndicatorsNote• The Status LED can be configured to flash while an event is active.• The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance.Status LED IndicationUnlit Connection and normal operation.Green Shows steady green for 10 seconds for normal operation after startup completed.Amber Steady during startup. Flashes during firmware upgrade or reset to factory default.Amber/Red Flashes amber/red if network connection is unavailable or lost.SD card slotNONONOTICETICETICE• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing theSD card. Use your fingers to insert and remove the card.• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD cardfrom the product’s webpage before removal.This product supports microSD/microSDHC/microSDXC cards.For SD card recommendations, see axis.comButtonsControl buttonFor location of the control button, see Product overview on page 9 .The control button is used for:• Resetting the product to factory default settings. See page 58.• Connecting to an AXIS Video Hosting System service. See page 50. To connect, press and hold the button for about 3seconds until the Status LED flashes green.• Connecting to AXIS Internet Dynamic DNS Service. See page50. To connect, press and hold the button for about 3 seconds.ConnectorsNetwork connectorRJ45 Ethernet connector with Power over Ethernet (PoE).63 |
Related manuals for Axis 01107-004
manualsdatabase
Your AI-powered manual search engine