Axis 01107-004 User Manual

AXIS M5065 PTZ Network CameraAbout wireless I/O (Z-Wave Plus®)About wireless I/O (Z-Wave Plus®)This is a security enabled Z-Wave Plus® product that can use encrypted Z-Wave Plus messages to communicate with security enabledZ-Wave Plus devices. The product can be operated in any Z-Wave network with compatible Z-Wave certified devices from othermanufacturers. To increase the network reliability, all non-battery operated Z-Wave devices in the network act as repeaters regardlessof vendor. This product acts as the control device and the Z-Wave devices added to it act as slaves.Associations• This product supports one association group with group identifier = 1 (LifeLine).• Maximum number of devices that can be added to the association group = 1.• Group identifier 1 is used to send the Device Reset Locally report.Command classesThis product supports the following command classes:• COMMAND_CLASS_ZWAVEPLUS_INFO• COMMAND_CLASS_TRANSPORT_SERVICE• COMMAND_CLASS_CRC_16_ENCAP• COMMAND_CLASS_APPLICATION_STATUS• COMMAND_CLASS_SECURITY_2• COMMAND_CLASS_SECURITY• COMMAND_CLASS_INCLUSION_CONTROLLER• COMMAND_CLASS_POWERLEVEL• COMMAND_CLASS_MANUFACTURER_SPECIFIC• COMMAND_CLASS_VERSION• COMMAND_CLASS_SUPERVISION• COMMAND_CLASS_ASSOCIATION• COMMAND_CLASS_ASSOCIATION_GRP_INFO• COMMAND_CLASS_DEVICE_RESET_LOCALLYThis product supports the following security command classes:• COMMAND_CLASS_SECURITY• COMMAND_CLASS_ NETWORK_MANAGEMENT_INCLUSION• COMMAND_CLASS_NETWORK_MANAGEMENT_BASIC• COMMAND_CLASS_NETWORK_MANAGEMENT_PROXY• COMMAND_CLASS_NETWORK_MANAGEMENT_INSTALLATION_MAINTENANCE• COMMAND_CLASS_MANUFACTURER_SPECIFIC• COMMAND_CLASS_POWERLEVEL41