Axis 01107-004 User Manual

AXIS M5065 PTZ Network CameraAbout events• Hardware- Network – Triggers an action rule if network connection is lost or restored. This can for example be used tostart recording to the SD card.• Input Signal- Manual Trigger – Triggers an action rule using the Manual Trigger button in the Live View page. See About thecontrols in the live view window on page 11. This can for example be used to validate actions during productinstallation and configuration.- Virtual Inputs – Used by VMS (Video Management System) to trigger actions. Virtual inputs can, for example,be connected to buttons in the VMS user interface.- Z-Wave – Triggers an action rule when the selected Z-Wave device changes state. This can for example beused to turn on a light when a door opens.• PTZ- Moving – Triggers an action rule when the camera view moves due to a PTZ operation. This can for examplebe used as an additional condition to prevent an action rule triggered by motion detection to record videowhile the camera view moves due to a PTZ operation.- Preset Reached – Triggers an action rule when the camera stops at a preset position. This can be for example beused with the Send Images action to upload images from the preset position.- Ready – Triggers an action rule when the PTZ functionality is ready to be used. This can for example be used tosteer the camera to a specific preset position when the product is started.• Storage- Disruption – Triggers an action rule if storage problems are detected, for example if the storage device isunavailable, removed, full, locked or if other read or write problems occur. This can for example be used tosend maintenance notifications.- Recording – Triggers an action rule when the Axis product records to the storage device. The recording statustrigger can be used to notify the operator, for example by flashing LED lights, if the product has started orstopped to record to the storage device. Note that, this trigger can be used only for edge storage recording status.• System- System Ready – Triggers an action rule when the product has been started and all services are running. This canfor example be used to send a notification when the product restarts.• Time- Recurrence – Triggers an action rule periodically. See How to set up recurrences on page 38. This can forexample be used to upload an image every 5 minutes.- Use Schedule – Triggers an action rule according to the selected schedule. See How to create scheduleson page 37.About actionsYou can configure several actions:• Overlay Text – Display an overlay text. See How to include overlay text in an action rule on page 22.• PTZ Control- Preset Position – Go to a preset position.• Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure thataudio is enabled in the selected stream profile.35