Axis 01107-004 User Manual

AXIS M5065 PTZ Network CameraAbout events• Send Images – Send images to a recipient.• Send Notification – Send a notification message to a recipient.• Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configuredunder System Options > Network > SNMP.• Send Video Clip – Send a video clip to a recipient.• Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection duringproduct installation and configuration.• Z-Wave – Send a command to switch on or off the selected Z-Wave device.How to add recipientsThe product can send media files and messages to notify users about events. Before the product can send media files or notificationmessages, you must define one ore more recipients. For information about available options, see About recipient types on page 36.To add a recipient:1. Go to Events > Recipients and click Add.2. Enter a descriptive name.3. Select a recipient Type.4. Enter the information needed for the recipient type.5. Click Test to test the connection to the recipient.6. Click OK.About recipient typesThe following recipient types are available:Recipient types Use with action NotesEmail Send ImagesSend NotificationSend Video ClipAn email recipient can contain multiple email addresses.FTP Send ImagesSend Video ClipSFTP Send ImagesSend Video ClipEncrypted file transfer using SSH File Transport Protocol(SFTP). SFTP is a more secure method than FTP but filetransfer might be slower, especially for large files such as highresolution video.Specify login information for the SFTP server and the server’spublic key MD5 fingerprint (32 hexadecimal digits).The SFTP recipient supports SFTP servers using SSH-2 withRSA and DSA host key types. RSA is the preferred method. Touse DSA, disable the RSA key on the SFTP server.36