Axis 01107-004 User Manual

AXIS M5065 PTZ Network CameraAbout system optionsAbout certificatesCertificates are used to authenticate devices on a network. Typical applications include encrypted web browsing (HTTPS), networkprotection via IEEE 802.1X and secure upload of images and notification messages for example via email. Two types of certificatescan be used with the Axis product:Server/Client certificates - To authenticate the Axis product. A Server/Client certificate can be self-signed or issued by a CertificateAuthority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.CA certificates - To authenticate peer certificates, for example the certificate of an authentication server in case the Axis product isconnected to an IEEE 802.1X protected network. The Axis product is shipped with several preinstalled CA certificates.Note• If the product is reset to factory default, all certificates, except preinstalled CA certificates, will be deleted.• If the product is reset to factory default, all preinstalled CA certificates that have been deleted will be reinstalled.How to create a self-signed certificate1. Go to Setup > System Options > Security > Certificates.2. Click Create self-signed certificate and provide the requested information.How to create and install a CA-signed certificate1. Create a self-signed certificate, see How to create a self-signed certificate on page 48.2. Go to Setup > System Options > Security > Certificates.3. Click Create certificate signing request and provide the requested information.4. Copy the PEM-formatted request and send to the CA of your choice.5. When the signed certificate is returned, click Install certificate and upload the certificate.How to install additional CA certificates1. Go to Setup > System Options > Security > Certificates.2. Click Install certificate and upload the certificate.Audio SupportSelect Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to configureaudio settings, see How to change audio settings on page 24.NoteDeselecting this option will disable audio globally in the Axis product, for configured events and profiles with audio as well.Date & TimeThe Axis product’s date and time settings are configured under System Options > Date & Time.Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (seebelow).To change the date and time settings, select the preferred Time mode under New Server Time:• Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date andtime are set once and will not be updated automatically.48