Chapter 5: Local Management5-582E48-27R/2E49-27R User’s Guide5.16.1 Image File Download Using BootPTo download a firmware image of FLASH to the 2E4X-27R using BootP,proceed as follows:1. Use the arrow keys to highlight the Download Method field.2. Use the SPACE bar to select BOOTP.3. Use the arrow keys to highlight the TFTP Gateway IP Addr field.4. Set the IP address of the TFTP gateway server (this defaults to thesame IP address set in the TFTP Gateway IP Addr field in the GeneralConfiguration screen).5. Use the arrow keys to highlight EXECUTE at the bottom of the screenand press ENTER. The message “BOOTP DOWNLOAD. WILLCOMMIT TO FLASH. REBOOT IN PROGRESS...” displays in theevent message line at the top of the screen and the new image isdownloaded into FLASH memory.5.16.2 Image File Download Using TFTPTo download a firmware image of FLASH to the 2E4X-27R using TFTP,proceed as follows:1. Use the arrow keys to highlight the Download Method field.2. Use the SPACE bar to select TFTP.3. Use the arrow keys to highlight the TFTP Gateway IP Addr field.4. Set the IP address of the TFTP gateway server (this defaults to thesame IP address as that set in the TFTP Gateway IP Addr field on theGeneral Configuration screen).5. Use the arrow keys to highlight the Download Server IP field.6. Enter the IP address of the TFTP server using the DDN format.For example: 134.141.79.1217. Use the arrow keys to highlight the Download File Name field.8. Enter the complete pathway and file name of the image stored on thedownload server.For example: /tftpboot/2E48.hex
