Interface Statistics Screen2E48-27R/2E49-27R User’s Guide5-73Oper Status (Read-Only)This field displays the current status of the interface. If this field displays“Testing”, no frames may be passed on this interface.MTU (Read-Only)The MTU field displays the maximum frame size (in octets) that a framemay contain to be received or transmitted from this interface.Speed (Read-Only)The Speed field displays the theoretical maximum of the interface’sbandwidth in bits per second.Link Status (Read-Only)This field displays the current link status of the interface. This fielddisplays either “Link” or “No Link”.Duplex Mode (Read-Only)This field indicates whether the interface is operating in normal (standard)or full duplex mode. This field displays either “Standard” or “FullDuplex”.Interface [nn] (Command)This command is used to enter an interface number for viewing statistics.For instructions on how to use this command, refer to Section 5.21.1.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this field, refer to Section 5.21.2.5.21.1 Displaying Interface StatisticsTo display the statistics for any interface, proceed as follows:1. Use the arrow keys to highlight the Interface [nn] field at the bottomof the screen.2. Press the SPACE bar to increment (or press the DEL [delete] key todecrement) the interface number.3. Press ENTER (neither the Interface # fields nor the statistics willchange until ENTER is pressed).
