General Configuration Screen2E48-27R/2E49-27R User’s Guide5-175.7 GENERAL CONFIGURATION SCREENThe General Configuration screen, Figure 5-9, allows the user to set thesystem date and time, IP address and subnet mask, the default gateway,the TFTP gateway IP address, and the operational mode. Also, clear theNVRAM, set the screen refresh time, the screen lockout time, the IPfragmentation, the COM port configuration, and monitor the total time(uptime) that the device has been running.To access the General Configuration screen from the DeviceConfiguration Menu screen, use the arrow keys to highlight theGENERAL CONFIGURATION menu item and press ENTER. TheGeneral Configuration screen displays.Figure 5-9 General Configuration ScreenThe following briefly explains each General Configuration screen field:MAC Address (Read-Only)Displays the base physical address of the 2E4X-27R.Firmware Revision: XX.XX.XXGeneral Configuration23142_15BOOTPROM Revision: XX.XX.XXMAC Address:IP Address:Subnet Mask:Default Gateway:TFTP Gateway IP Addr:Device Date:Device Time:Screen Refresh Time:Screen Lockout Time:Com: [ENABLED] Application: [LM]Clear NVRAM [NO]Device Uptime XX D XX H XX MDevice Type: 2E48-27RIP Fragmentation [ENABLED]Operational Mode: [802.1D SWITCHING]00-00-ID-00-00-000.0.0.0255.255.0.0NONE DEFINED0.0.0.02E48-27R LOCAL MANAGEMENTEvent Message LineRETURNSAVE10/11/9714:23:0030 sec.15 min.EXIT
