Chapter 5: Local Management5-382E48-27R/2E49-27R User’s Guide5.10 SWITCH CONFIGURATION SCREENThe Switch Configuration screen, Figure 5-18, provides the basic setupoptions to make a switch operational in your network.To access the Switch Configuration screen from the Device ConfigurationMenu screen, use the arrow keys to highlight the SWITCHCONFIGURATION menu item and press ENTER. The SwitchConfiguration screen displays showing ports 1 through 8. To view or editthe fields for other ports, highlight [9-16], [17-24], or [25-27] at thebottom of the screen and press the ENTER key.Figure 5-18 Switch Configuration ScreenNOTEThe Switch Configuration screen is not available if theoperational mode of the device is set to SECURE FAST VLAN.This screen may only be used when the device is configured tooperate as an 802.1D or 802.1Q switch.Firmware Revision: XX.XX.XXSwitch Configuration23141-18Device Type: 2E48-27RBOOTPROM Revision: XX.XX.XXPort #12345678Statelearninglisteningstandbylearninglisteningstandbylisteninglistening2E48-27R LOCAL MANAGEMENTEvent Message LineRETURNSAVEMAC Address00-00-1D-00-00-0000-00-1D-00-00-0100-00-1D-00-00-0200-00-1D-00-00-0300-00-1D-00-00-0400-00-1D-00-00-0500-00-1D-00-00-0600-00-1D-00-00-07Status[ENABLED][DISABLED][ENABLED][DISABLED][ENABLED][DISABLED][ENABLED][DISABLED]Switch Address: 00-00-1D-00-00-00Number of Ports: 27Type of STA: [DEC]Age Time (sec): 300[9-16]EXIT
