General Configuration Using Local Management128CSX400 and CSX400-DC User’s GuideThe following list explains each of the basic Local Management screen fields:Event Message Field — This field briefly displays messages that indicate if a LocalManagement procedure was executed correctly or incorrectly, that changes were saved or notsaved to Non-Volatile Random Access Memory (NVRAM), or that a user did not have accessprivileges to an application.Table 21 describes the most common event messages. Event messages related to specific LocalManagement applications are described with those applications throughout this manual.Display Fields — Display fields cannot be edited. These fields may display information whichnever changes, or changes as the result of Local Management operations, user selections, ornetwork monitoring information.Input Fields — Input fields require keyboard characters to be entered. IP addresses, System Date,and System Time are examples of Input fields.Selection Fields — Selection fields provide a series of possible values. Only applicable valuesappear in Selection fields.Command Fields — Command fields are located at the bottom of Local Management screens.Command fields are used to exit Local Management screens and to save Local Managemententries. Command fields perform a management action simply by being selected and activated.Only command fields can make a change to a device’s configuration.Table 21 Event MessagesMessage MeaningSAVED OK One or more fields were modified,and saved to NVRAM.NOT SAVED?--PRESS SAVE TOKEEP CHANGESOne or more fields were modified,but not yet saved to NVRAM.NOTHING TO SAVE The SAVE command was executed,but nothing was saved to NVRAM.
