General Configuration Using Local Management146CSX400 and CSX400-DC User’s Guide• Reboot After Download — This field displays when the RUNTIME Download Method ischosen. Selecting YES forces the CSX400 to reboot and use the new firmware imageimmediately. Selecting NO allows the CSX400 to continue using the existing firmware imagewithout interrupting network operation.• Commit to Flash — This field displays when the BOOTPROM Download Method is chosen.Selecting YES allows the CSX400 to continue using the existing firmware image withoutinterrupting network operation and selecting NO allows the CSX400 to reboot and use the newfirmware image immediately.• TFTP Gateway Server IP — This field displays when the BOOTPROM Download Methodis chosen. Use this field to enter the IP address of the TFTP Gateway Server.Last Image Server IP — Displays the IP address of the last server used to download a firmwareimage to the CSX400.Last Image File Name — Displays the file name of the last firmware image downloaded to theCSX400.Download Server IP — Use this field to type in the IP address of the server from which you wishto download the firmware image.Download File Name — Use this field to type in the file name of the firmware image you wish todownload to the CSX400.Selecting a Flash Download Method1. Use the arrow keys to highlight the Download Method field.2. Press the SPACE bar or BACKSPACE to select a flash download method.• If you select RUNTIME, the Reboot After Download field displays.• If you select BOOTPROM, the Commit to Flash field and the TFTP Gateway Server IPfield display.
