General Configuration Using Local Management138CSX400 and CSX400-DC User’s GuideSetting the System DateThe CSX400 is year 2000 compliant so that the System Date field can be set beyond the year 1999.To set the system date, perform the following steps:1. Use the arrow keys to highlight the System Date field.2. ENTER the date in an MM/DD/YY YY format.3. Press ENTER to set the system date.4. Use the arrow keys to highlight the SAVE command at the bottom of the screen and pressENTER.If the date entered was a valid format, the Event Message field at the top of the screen displays“SAVED OK”. If the entry was not valid, Local Management does not alter the current value andrefreshes the System Date field with the previous value.Setting the System TimeTo set the system time, perform the following steps:1. Use the arrow keys to highlight the System Time field.2. ENTER the time in a 24-hour format, HH:MM:SS.3. Press ENTER to set the system time.4. Use the arrow keys to highlight the SAVE command field at the bottom of the screen and pressENTER. If the time entered was a valid format, the Event Message field at the top of the screendisplays “SAVED OK”. If the entry was not valid, Local Management does not alter the currentvalue and refreshes the System Time field with the previous value.NOTEWhen entering the date in the system date field, you do not need to add separatorsbetween month, day, and year numbers, as long as each entry uses two decimalnumbers. For example, to set the date to 03/17/1997, type “03171997” in the SystemDate field.NOTEWhen entering the time in the system time field, you do not need to add separatorsbetween hours, minutes, and seconds, as long as each entry uses two decimalnumbers. For example, to set the time to 6:45 a.m., type “064500” in the System Timefield.
