General Configuration Using Local ManagementCSX400 and CSX400-DC User’s Guide 147RUNTIME DownloadIf you select RUNTIME Download, perform the following steps:1. Use the arrow keys to highlight the Reboot After Download field.2. Press the SPACE bar or BACKSPACE to select one of the following:• YES, if you want the CSX400 to reboot and use the new firmware image immediately.• NO, if you want the CSX400 to continue using the existing firmware image withoutinterrupting network operation. The CSX400 stores the new firmware image in flashmemory. When you reset the CSX400, it boots from flash memory using the new image.3. Use the arrow keys to highlight the Download Server IP field.4. Type the IP address of the download server and press ENTER.5. Use the arrow keys to highlight the Download File Name field.6. Type the complete path and filename of the new image file to be downloaded. You must includeall directories and subdirectories involved in accessing the file. Type the new entry over theprevious entry. For example: c:\images\cyberswitch\11011.hex7. Press ENTER.8. Use the arrow keys to highlight the EXECUTE command located at the bottom of the FlashDownload screen.9. Press ENTER to begin the download. The CSX400 attempts to download the file using the IPaddress, filename, and path provided. This file is assigned to the Flash memory of the CSX400.BOOTPROM DownloadIf you select a BOOTPROM Download, perform the following steps:1. Use the arrow keys to highlight the Commit to Flash field.2. Press the SPACE bar or BACKSPACE to select one of the following:• YES, if you want the CSX400 to continue using the existing firmware image withoutinterrupting network operation. The CSX400 stores the new firmware image in flashmemory. When you reset the CSX400, it boots from flash memory using the new image.• NO, if you want the CSX400 to reboot and use the new firmware image immediately.3. Use the arrow keys to highlight the Download Server IP field.4. Type the IP address of the download server and press ENTER.
