General Configuration Using Local Management164CSX400 and CSX400-DC User’s GuideAdminStatusTime — Displays the amount of time elapsed since an IP address was assigned tothe CSX400.Description — Describes the selected Port.MAC Address — Displays the physical (MAC) address of the CSX400.Interf. Type — Displays the type of interface used by the specified port.Oper Status — Displays the operational status of the selected port.IPX General Configuration FieldsThis section provides a general overview of the procedures required to configure the CSX400. Thefollowing list describes each of the IPX General Config fields.+PORT- — Use this field to select the routing port that you wish to configure.Framing — Use this field to select the format of the Frame in which IPX packets areencapsulated for transmission.MTU — Use this field to set the Maximum Transmission Unit (MTU).IPX Routing — Use this field to enable IP Routing Services.IPX Forwarding — Use this field to enable IP Forwarding.IPX Address — Use this field to assign an IP Address to the port that you wish to configure.Selecting a Port for ConfigurationRouting Services allows you to choose the ports that you want to configure for IPX routing. Toselect a router port to configure for IPX routing, complete the following steps:1. Use the arrow keys to highlight the PORT option.2. Type in the number of the port that you want to configure for IPX routing, then press ENTER.NOTEYou can type in the port number, or you can use the +PORT- option at the bottom ofthe screen to scroll through the list of the ports on your device. To use the +PORT-option, use the arrow keys to highlight the + (to go forward), or the - (to go backward),and then press ENTER to scroll through the available ports in the direction you haveselected. You can also use the + and - keys to scroll through the available ports.
