General Configuration Using Local ManagementCSX400 and CSX400-DC User’s Guide 1313. Repeat steps 1 and 2 until the Main Menu screen displays.4. Use the arrow keys to highlight the EXIT command at the bottom of the Main Menu screen.5. Press ENTER. The CSX400 Local Management Password screen displays and the LocalManagement session ends.Establishing a TELNET ConnectionThe CSX400 is shipped with a temporary IP Address of 192.168.254.254 so that your computercan communicate with it over your Local Area Network (LAN) through a TELNET connection.However, to establish a TELNET connection, your computer must be on the same subnet as theCSX400. Cabletron Systems recommends that you assign a temporary IP Address of192.168.254.253 to your computer to ensure that both devices are on the same subnet. TELNETconnections to the host device require the community name passwords assigned at the SNMPCommunity Names screen or if you are doing an initial configuration, use the default passwordpublic. Refer to the SNMP Community Names section of this manual for additional informationabout community names.Local Management Screen HierarchyLocal Management consists of a series of menu screens that provide a path to each of the LocalManagement function screens. Navigate through Local Management by selecting items from themenu screen. Figure 55 shows the hierarchy of the Local Management screens.Figure 55 Hierarchy of Local Management ScreensNOTESee the instructions included with the TELNET application for information aboutestablishing a TELNET session.Main MenuPasswordSetup MenuSystem LevelSNMP Community NamesSNMP TrapsMIB NavigatorFlash DownloadBridge SetupRouter SetupWAN SetupIPIPXIP ConfigurationIP RIPIPX ConfigurationIPX RIPIPX SAP
