MIB Navigator202 CSX400 and CSX400-DC User’s Guideimux:Syntax: imux Description: This function lets you balance your LAN traffic between two T1 WANports and is used with Point to Point Protocol (PPP). When you selectInverse Multiplexing via QuickSET, bridging, IP routing, and IPXrouting functions are all disabled. The WAN device at the other end ofthe WAN link(s) must be a Cabletron Systems device, capable ofreceiving the balanced WAN traffic. The imux command with no optionsdisplays the status information.Options: -ea enables the Inverse Multiplexer Application.-da disables the Inverse Multiplexer Application.-eg enables the Inverse Multiplexer group designated by.-dg disables the Inverse Multiplexer group designated by.-ac Adds the WAN channeldesignated by to the Inverse Multiplexer groupdesignated by .-dc Deletes the WAN channeldesignated by from the Inverse Multiplexer groupdesignated by . A unique value identifying an element in a sequence ofgroups which belong to the WAN Inverse Multiplexer Application. The MIB II ifIndex value used to represent aWAN channel that has an appropriate datalink protocol associated withit.Example:MIBNav-> imux------------------------------------------------------------------------------------------------------------------------------------WAN Inverse Multiplexer Status:Number of WAN Inverse Multiplexer Groups currenly programmed: 1Number of WAN Inverse Multiplexer Channels currenly programmed: 2Group ID11Channel ID2121 15360001536000291483387292249652(Kbits/sec)Available BWPhysical NumberWAN(bytes)Xmit Byte Countimux
