Cabletron Systems SMALL OFFICE CyberSwitch 150 Manual

Also see for SMALL OFFICE CyberSwitch 150: Quick start guide User guide

Small Office Remote Access Switch 73IP ROUTING N ETWORK WITH PPP DEVICESConfigure SITE1Next, select the RIP Propagation Control. This controls how a static route is propagated via RIP.Press 3 to propagate only when the Next Hop is connected. This flag indicates that the routeinformation is propagated via RIP only when the next hop router is connected to SITE1.The screen interaction will resemble the following:A summary of the values you have entered for this static route will be displayed. Respond to theprompt asking you if you wish to add this static route. If you add this static route the followingscreen will then be displayed:SITE1 does not need a static route to the Router on its LAN. This is because SITE1 supports RIP,and the Router supports RIP. RIP is a protocol that exchanges routing information among IPdevices. Return to the Main Menu. We now need to complete SITE1’s Security configuration.FINISHING THE SECURITY C ONFIGURATIONThis example uses device security, and the remote devices are configured in the on-nodeauthentication database. We enabled device security using an on-node authentication databasewhen we configured the SITE2 device.To complete the security configuration, press 3 at the Main CFGEDIT Menu. The Security Menuwill then be displayed. The sections below provide instructions for configuring the remainingsecurity information.Is this route the DEFAULT Route (Y or N)? NEnter the Destination IP Address in dotted decimal notationor to cancel? 128.3.0.0Enter the number of significant bits for the subnet mask[default = 16] Enter the Next Hop IP Address in dotted decimal notation or ‘0’ if the Next Hopis an unnumbered link, or to cancel? 0Enter the device name of the Next Hop deviceor to cancel? SITE2Enter the Metric value for this route [default = 2]? RIP Propagation Control:1) Do Not Propagate.2) Always Propagate.3) Propagate only when the Next Hop is connected.Enter a RIP Propagation Scheme from the above menu [default = 3]? Current STATIC ROUTE Configuration:id Destination Address Mask Next Hop Metric-- ------------------- ------------------- ------------------- ------1 128.3.0.0 255.255.0.0 (SITE2) 2(1) Add, (2) Change, (3) Delete, (4) Display a STATIC ROUTE or press for previousmenu?