Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory, it wasprogrammed to Mode 2. The mode to which thevehicle was programmed may have been changed sinceit left the factory.To program the vehicle to a different mode, use thefollowing procedure:1. Enter the personalization portion of the SETUPmenu following the instructions listed previously.2. Turn the TUNE/SEL knob until REMOTE EXITRECALL is highlighted.3. Press the TUNE/SEL knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear next to the feature name.If this feature is selected, Remote Recall Memorycannot be selected.The mode you selected is now set. You can either exitthe programming mode by following the instructionslater in this section or program the next feature availableon your vehicle.Key in Recall MemoryIf your vehicle has the optional memory package, youwill have this feature. When this feature is turned on, youcan recall any previously programmed seat and mirrorpositions when the key is inserted into the ignition.Programmable ModesMode 1: ONMode 2: OFFBefore your vehicle was shipped from the factory, it wasprogrammed to Mode 2. The mode to which thevehicle was programmed may have been changed sinceit left the factory.To program the vehicle to a different mode, use thefollowing procedure:1. Enter the personalization portion of the SETUPmenu following the instructions listed previously.2. Turn the TUNE/SEL knob until KEY IN RECALLMEMORY is highlighted.3. Press the TUNE/SEL knob to switch back and forthbetween on and off.When the mode is turned on, a check mark willappear next to the feature name.3-73
